We are the leading Wholesaler and Manufacturer of Oil Burner, Nozzle Oil Burner, Oil Pump, Ignition Transformer, Oil Burner Controller, etc. To be a company that focuses on quality; we have provided our customers with the best quality products.

Pt Indira Mitra Boiler apart from providing boiler spare parts, we also provide burner spare parts such as Suntec burner pumps with various types and requirements, including Suntec pump burner requirements.

PUMP OPERATING PRINCIPLES

The gear set draws oil from the tank through the built-in diesel filter and transfers it to a valve that regulates oil pressure into the nozzle passage. All oil that does not go through the nozzle line will be discharged through the return valve to the return line in a two-pipe installation or, if it is a one-pipe installation, back to the suction port in the gear-set.

In this case, the bypass plug must be removed from the return port and the return port sealed by a steel plug and washer. This valve also has a cut-off function* as follows:

During the starting period when the gear speed increases, all the oil will pass through special flats in the piston, returning to the return. Once the speed reaches a certain value and the flow can no longer pass through this flat, then the pressure increases rapidly overcoming the force of the valve spring and opening the valve.

During the stop sequence, the gear speed slows down and the valve closes when the gear-set capacity is lower than level flow. The cut-on and cut-off speed depends on the gear-set size and the set pressure. Bleeding: Bleeding in two automatic pipe operations, but may be accelerated by loosening the plug in the pressure gauge port.

In one pipe operation, the pressure port must be opened to bleed into the system SUNTEC J oil pumps incorporate a pressure regulating valve with cut-off function except J oil pump 1002. J oil pumps are adapted for heavy oils from 2.8 to 200 cSt. The J range 1000 oil pump is constructed with conical thread. The J range 1000 and 1001 oil pumps incorporate an in-line cut-off function. The J range of oil pumps 1002 are built without an in-line cut-off function.

• French Suntec brand
• Max Flow Rate 2000 LPH
• SUNTEC AJ E Models
• Head 40 bar
• Minimum order is 1 piece

SPESIFIKASI OIL PUMP BURNERS SUNTEC

We offer Suntec Fuel Oil Pumps , Suntec Fuel Oil Gear Pumps and oil burner pumps which are widely used for industrial applications. Suntec produces more than 400 models of Fuel Pumps for light and heavy oils with capacities up to 2000 ltr./hr.

Our fuel oil pumps, fuel oil gear pumps, oil burner pumps and gear pumps are ideal for low capacity, medium capacity and high capacity burners ranging from 10KW to 30,000KW.

The different pump models are as follows:

• AN 47A – AN 97 C
• AE 35 C – AE 77 C
• US 47A – US 67 C
• AP 47A – AP 67 C
• AL 30 C – ALE 55 C
• AT 2 45 A- AT 3 65 D
• D 45 B – D 67 C
• AJ 4 AC – AJ 6 DC
• J3 CAB – J7 CCC
• E4 NA – E7 NC
• TA 2A – TA5C
• T 2 C – T 5 C

APPLICATION

• Light and medium oils.
• One or two pipe systems.
• Usually associated with in-line solenoid valves

That’s all the articles about Suntec burner pumps, for sales personnel contact sales marketing,

Info Kontak penjualan :

PT Indira Mitra Boiler

Jl. Emerald Raya Sepatan Ruko 8i, Kosambi, Kec. Sukadiri, Kabupaten Tangerang, Banten 15530

Email : idmarifin2@gmail.com / arifinspi2023@gmail.com